WATCH: How to Build a Simple Water Purifier That Turns Dirty Water and Even Salt Water into Clean Fresh Pure Water


Cracking Innovation from the man who came up with this genius design for a water purifier.


The example in the video below just uses approximately 12ft of Copper Tubing and a few tight fittings. Carefully follow the instructions below and you will have yourself a water purifier in no time! Please also note that if you don't have the tools required to solder - you can always purchase push on fittings from any hardware store. 



Warning: If you do decide that soldering is the way forward, make sure it is lead-free. 

Here is the video:


There you go!






If you enjoyed this article or learned something new, please don't forget to share it with others so they have a chance to enjoy this free information. This article is open source and free to reblog or use if you give a direct link back to the original article URL. Thanks for taking the time to support an open source initiative. We believe all information should be free and available to everyone. Have a good day and we hope to see you soon!
WATCH: How to Build a Simple Water Purifier That Turns Dirty Water and Even Salt Water into Clean Fresh Pure Water WATCH: How to Build a Simple Water Purifier That Turns Dirty Water and Even Salt Water into Clean Fresh Pure Water Reviewed by O Slapper on 18:46:00 Rating: 5
Copyright Organic & Healthy 2016. Powered by Blogger.